MapleSim™ Hydraulics Library® from Modelon Installation and Licensing Guide


MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide
Maple Requirements
MapleSim 6.2 Hydraulics Library from Modelon Installation Using a Single User License
Activating Single User Versions
MapleSim 6.2 Hydraulics Library from Modelon Installation Using a Network License
Windows Silent Installation
Configure the License Manager
Named Network Licensing
Getting Started with the MapleSim Hydraulics Library from Modelon
System Requirements
Trademarks

MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide

The MapleSim™ Hydraulics Library® from Modelon provides enhanced hydraulic components for the modeling of hydraulics systems.

Maple Requirements

Before installing MapleSim 6.2 Hydraulics Library from Modelon, Maple 17.01 and MapleSim 6.2 must be installed and activated on your computer. For Maple and MapleSim installation and activation instructions, see the Maple 17 Installation and Licensing Guide and the MapleSim 6.2 Installation and Licensing Guide found in the Install.html files on your product installation discs.

MapleSim 6.2 Hydraulics Library from Modelon Installation Using a Single User License

32-bit Windows Single User Installation

For Windows® XP, Windows Server® 2008, Windows Vista®, Windows® 7, Windows Server® 2012, and Windows® 8 single user installation, read this section. For 64-bit Windows, see 64-bit Windows Single User Installation.

During the installation, you will need your purchase code, generally sent to you in an email.

To install MapleSim 6.2 Hydraulics Library from Modelon on your Windows operating system, read and complete the following tasks

Pre-Installation Instructions

  1. Check the System Requirements for your operating system.
  1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Hydraulics Library from Modelon files.
  1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.
  1. Close all programs.

Install MapleSim 6.2 Hydraulics Library from Modelon

  1. Ensure that you have reviewed the Pre-installation Instructions.
  1. Choose one of the following two options to launch the installer:
  • From DVD
  1. Place the install disc in the DVD-ROM drive.
  1. Locate and double-click MS6.2ModelonHydraulicsWindowsInstaller.exe from the install disc.
  • From download

Double-click MS6.2ModelonHydraulicsWindowsInstaller.exe from where you downloaded the file.

  1. Follow the on-screen instructions.
  1. In the Choose The Type of Licensing screen, select Single User License .
  1. When prompted, enter the purchase code and the required information to complete activation.
  1. If you activated successfully, you are ready to use MapleSim 6.2 Hydraulics Library from Modelon. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions.

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.

64-bit Windows Single User Installation

During the installation, you will need your purchase code, generally sent to you in an email.

To install MapleSim 6.2 Hydraulics Library from Modelon on your Windows operating system, read and complete the following tasks

Pre-Installation Instructions

  1. Check the System Requirements for your operating system.
  1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Hydraulics Library from Modelon files.
  1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.
  1. Close all programs.

Install MapleSim 6.2 Hydraulics Library from Modelon

  1. Ensure that you have reviewed the Pre-installation Instructions.
  1. Choose one of the following two options to launch the installer:
  • From DVD
  1. Place the install disc in the DVD-ROM drive.
  1. Locate and double-click MS6.2ModelonHydraulicsWindowsX86_64Installer.exe from the install disc.
  • From download

Double-click MS6.2ModelonHydraulicsWindowsX86_64Installer.exe from where you downloaded the file.

  1. Follow the on-screen instructions.
  1. In the Choose The Type of Licensing screen, select Single User License .
  1. When prompted, enter the purchase code and the required information to complete activation.
  1. If you activated successfully, you are ready to use MapleSim 6.2 Hydraulics Library from Modelon. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions.

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.

Macintosh Single User Installation

For Macintosh® installation instructions, read this section.

During the installation, you will need your purchase code, generally sent to you in an email.

To install MapleSim 6.2 Hydraulics Library from Modelon on your Macintosh operating system, read and complete the following tasks:

Pre-Installation Instructions

  1. Check the System Requirements for your operating system.
  1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Hydraulics Library from Modelon files.
  1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.
  1. Close all programs.

Install MapleSim 6.2 Hydraulics Library from Modelon

  1. Ensure that you have reviewed the Pre-installation Instructions.
  1. Choose one of the following two options to launch the installer:
  • From DVD
  1. Place the install disc in the DVD-ROM drive.
  1. Locate and double-click MS6.2ModelonHydraulicsMacInstaller.dmg from the install disc, then double-click MS6.2ModelonHydraulicsMacInstaller.
  • From download

Double-click MS6.2ModelonHydraulicsMacInstaller.dmg from where you downloaded the file, then double-click MS6.2ModelonHydraulicsMacInstaller.

  1. Follow the on-screen instructions.
  1. In the Choose The Type of Licensing screen, select Single User License .
  1. When prompted, enter the purchase code and the required information to complete activation.
  1. If you activated successfully, you are ready to use MapleSim 6.2 Hydraulics Library from Modelon. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions.

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.

32-bit Linux Single User Installation

During the installation, you will need your purchase code, generally sent to you in an email.

To install MapleSim 6.2 Hydraulics Library from Modelon on your 32-bit Linux® operating systems, read and complete the following tasks.

Pre-Installation Instructions

  1. Check the System Requirements for your operating system.
  1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Hydraulics Library from Modelon files.
  1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.
  1. Close all programs.

Install MapleSim 6.2 Hydraulics Library from Modelon

  1. Ensure that you have reviewed the Pre-installation Instructions.
  1. Choose one of the following two options to launch the installer:
  • From DVD
  1. Place the install disc in the DVD-ROM drive.
  1. Locate and run MS6.2ModelonHydraulicsLinux32Installer.bin from the install disc
  • From download

Run MS6.2ModelonHydraulicsLinux32Installer.bin from where you downloaded the file.

  1. Follow the on-screen instructions.
  1. In the Choose The Type of Licensing screen, select Single User License .
  1. When prompted, enter the purchase code and the required information to complete activation.
  1. If you activated successfully, you are ready to use MapleSim 6.2 Hydraulics Library from Modelon. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions.

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.

64-bit Linux Single User Installation

During the installation, you will need your purchase code, generally sent to you in an email.

To install MapleSim 6.2 Hydraulics Library from Modelon on your 64-bit Linux® operating systems, read and complete the following tasks.

Pre-Installation Instructions

  1. Check the System Requirements for your operating system.
  1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Hydraulics Library from Modelon files.
  1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.
  1. Close all programs.

Install MapleSim 6.2 Hydraulics Library from Modelon

  1. Ensure that you have reviewed the Pre-installation Instructions.
  1. Choose one of the following two options to launch the installer:
  • From DVD
  1. Place the install disc in the DVD-ROM drive.
  1. Locate and run MS6.2ModelonHydraulicsLinuxX86_64Installer.bin from the install disc.
  • From download

Run MS6.2ModelonHydraulicsLinuxX86_64Installer.bin from where you downloaded the file.

  1. Follow the on-screen instructions.
  1. In the Choose The Type of Licensing screen, select Single User License .
  1. When prompted, enter the purchase code and the required information to complete activation.
  1. If you activated successfully, you are ready to use MapleSim 6.2 Hydraulics Library from Modelon. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions.

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.

Activating Single User Versions

MapleSim 6.2 Hydraulics Library from Modelon requires a license file to operate. License files for earlier versions of MapleSim Hydraulics Library from Modelon will not work with MapleSim 6.2 Hydraulics Library from Modelon. You must activate the single user version of MapleSim 6.2 Hydraulics Library from Modelon to obtain your license file. If you are running a single user installer, you can activate during the installation process. If you do not activate during the installation process, follow the steps below.

Note: Activation requires an Internet connection. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

Windows

  1. Launch the Maplesoft Activation window.
  • On Windows XP, Windows Vista, and Windows 7, select Start > (All) Programs > MapleSim 6.2 Hydraulics Library from Modelon > Tools > Activate MapleSim 6.2 Hydraulics Library from Modelon. Note: If you are using Windows Vista or Windows 7, right-click Activate MapleSim 6.2 Hydraulics Library from Modelon and select Run as administrator.
  • On Windows 8, right-click anywhere in the Start window. The toolbar opens at the bottom of the screen. Next, click the All apps icon. Under the MapleSim 6.2 Hydraulics Library from Modelon heading, right-click on the Activate MapleSim 6.2 Hydraulics Library from Modelon tile. Next, click the Run as administrator icon.
  1. When the window opens, you will be prompted to enter your purchase code. After you have entered your purchase code, click Next. Note: If you are activating behind a proxy server, select the Yes option, and make sure to enter this information before clicking Next.
  1. You will be prompted to enter additional information. Click Next when this is complete.

A MapleSim 6.2 Hydraulics Library from Modelon license file (ModelonHydraulics.dat) will be saved in the toolbox\ModelonHydraulics\license folder of your Maple 17 installation. If you experience difficulties with activation, check our FAQs page at http://www.maplesoft.com/support/Faqs/Activation.

Linux

  1. To launch the Maplesoft Activation window, run the activation script located in the $HOME/Maple17/toolbox/ModelonHydraulics/license directory.
  1. When the window opens, you will be prompted to enter your purchase code. After you have entered your purchase code, click Next. Note: If you are activating behind a proxy server, select the Yes option, and make sure to enter this information before clicking Next.
  1. You will be prompted to enter additional information. Click Next when this is complete.

A MapleSim 6.2 Hydraulics Library from Modelon license file (ModelonHydraulics.dat) will be saved in the toolbox/ModelonHydraulics/license folder of your Maple 17 installation. If you experience difficulties with activation, check our FAQs page at http://www.maplesoft.com/support/Faqs/Activation.

Macintosh

  1. To launch the Maplesoft Activation window, run the activation script located in the toolbox/ModelonHydraulics/license folder of your Maple 17 installation. By default, /Library/Frameworks/Maple.framework/Versions/17/toolbox/ModelonHydraulics/license.
  1. When the window opens, you will be prompted to enter your purchase code. After you have entered your purchase code, click Next. Note: If you are activating behind a proxy server, select the Yes option, and make sure to enter this information before clicking Next.
  1. You will be prompted to enter additional information. Click Next when this is complete.

A MapleSim 6.2 Hydraulics Library from Modelon license file (ModelonHydraulics.dat) will be saved in the toolbox/ModelonHydraulics/license folder of your Maple 17 installation. If you experience difficulties with activation, check our FAQs page at http://www.maplesoft.com/support/Faqs/Activation.

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.

MapleSim 6.2 Hydraulics Library from Modelon Installation Using a Network License

32-bit Windows Installation Using a Network License

For Windows XP, Windows Server 2008, Windows Vista, Windows 7, Windows Server 2012, and Windows 8 installation using a network license, read this section. For 64-bit Windows, see 64-bit Windows Installation Using a Network License.

To install MapleSim 6.2 Hydraulics Library from Modelon on your Windows operating system using a network license, read and complete the following tasks.

Pre-Installation Instructions

  1. Check the System Requirements for your operating system.
  1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Hydraulics Library from Modelon files.
  1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.
  1. Close all programs.

Install MapleSim 6.2 Hydraulics Library from Modelon

  1. Ensure that you have reviewed the Pre-installation Instructions.
  1. Choose one of the following two options to launch the installer:
  • From DVD
  1. Place the install disc in the DVD-ROM drive.
  1. Locate and double-click MS6.2ModelonHydraulicsWindowsInstaller.exe from the install disc.
  • From download

Double-click MS6.2ModelonHydraulicsWindowsInstaller.exe from where you downloaded the file.

  1. Follow the on-screen instructions.
  1. In the Choose The Type of Licensing screen, select Network License .
  1. When prompted, enter the name or IP address of the license server.
  1. MapleSim 6.2 Hydraulics Library from Modelon is now installed. Prior to using MapleSim 6.2 Hydraulics Library from Modelon, you need to Configure the License Manager.

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.

64-bit Windows Installation Using a Network License

To install MapleSim 6.2 Hydraulics Library from Modelon on your Windows operating system using a network license, read and complete the following tasks.

Pre-Installation Instructions

  1. Check the System Requirements for your operating system.
  1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Hydraulics Library from Modelon files.
  1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.
  1. Close all programs.

Install MapleSim 6.2 Hydraulics Library from Modelon

  1. Ensure that you have reviewed the Pre-installation Instructions.
  1. Choose one of the following two options to launch the installer:
  • From DVD
  1. Place the install disc in the DVD-ROM drive.
  1. Locate and double-click MS6.2ModelonHydraulicsWindowsX86_64Installer.exe from the install disc.
  • From download

Double-click MS6.2ModelonHydraulicsWindowsX86_64Installer.exe from where you downloaded the file.

  1. Follow the on-screen instructions.
  1. In the Choose The Type of Licensing screen, select Network License .
  1. When prompted, enter the name or IP address of the license server.
  1. MapleSim 6.2 Hydraulics Library from Modelon is now installed. Prior to using MapleSim 6.2 Hydraulics Library from Modelon, you need to Configure the License Manager.

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.

Macintosh Installation Using a Network License

For Macintosh® installation instructions, read this section.

To install MapleSim 6.2 Hydraulics Library from Modelon on your Macintosh operating system, read and complete the following tasks:

Pre-Installation Instructions

  1. Check the System Requirements for your operating system.
  1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Hydraulics Library from Modelon files.
  1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.
  1. Close all programs.

Install MapleSim 6.2 Hydraulics Library from Modelon

  1. Ensure that you have reviewed the Pre-installation Instructions.
  1. Choose one of the following two options to launch the installer:
  • From DVD
  1. Place the install disc in the DVD-ROM drive.
  1. Locate and double-click MS6.2ModelonHydraulicsMacInstaller.dmg from the install disc, then double-click MS6.2ModelonHydraulicsMacInstaller.
  • From download

Double-click MS6.2ModelonHydraulicsMacInstaller.dmg from where you downloaded the file, then double-click MS6.2ModelonHydraulicsMacInstaller.

  1. Follow the on-screen instructions.
  1. In the Choose The Type of Licensing screen, select Network License .
  1. When prompted, enter the name or IP address of the license server.
  1. MapleSim 6.2 Hydraulics Library from Modelon is now installed. Prior to using MapleSim 6.2 Hydraulics Library from Modelon, you need to Configure the License Manager.

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.

32-bit Linux Installation Using a Network License

To install MapleSim 6.2 Hydraulics Library from Modelon on your 32-bit Linux® operating systems, read and complete the following tasks.

Pre-Installation Instructions

  1. Check the System Requirements for your operating system.
  1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Hydraulics Library from Modelon files.
  1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.
  1. Close all programs.

Install MapleSim 6.2 Hydraulics Library from Modelon

  1. Ensure that you have reviewed the Pre-installation Instructions.
  1. Choose one of the following two options to launch the installer:
  • From DVD
  1. Place the install disc in the DVD-ROM drive.
  1. Locate and run MS6.2ModelonHydraulicsLinux32Installer.bin from the install disc
  • From download

Run MS6.2ModelonHydraulicsLinux32Installer.bin from where you downloaded the file.

  1. Follow the on-screen instructions.
  1. In the Choose The Type of Licensing screen, select Network License .
  1. When prompted, enter the name or IP address of the license server.
  1. MapleSim 6.2 Hydraulics Library from Modelon is now installed. Prior to using MapleSim 6.2 Hydraulics Library from Modelon, you need to Configure the License Manager.

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.

64-bit Linux Installation Using a Network License

To install MapleSim 6.2 Hydraulics Library from Modelon on your 64-bit Linux® operating systems, read and complete the following tasks.

Pre-Installation Instructions

  1. Check the System Requirements for your operating system.
  1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Hydraulics Library from Modelon files.
  1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.
  1. Close all programs.

Install MapleSim 6.2 Hydraulics Library from Modelon

  1. Ensure that you have reviewed the Pre-installation Instructions.
  1. Choose one of the following two options to launch the installer:
  • From DVD
  1. Place the install disc in the DVD-ROM drive.
  1. Locate and run MS6.2ModelonHydraulicsLinuxX86_64Installer.bin from the install disc.
  • From download

Run MS6.2ModelonHydraulicsLinuxX86_64Installer.bin from where you downloaded the file.

  1. Follow the on-screen instructions.
  1. In the Choose The Type of Licensing screen, select Network License .
  1. When prompted, enter the name or IP address of the license server.
  1. MapleSim 6.2 Hydraulics Library from Modelon is now installed. Prior to using MapleSim 6.2 Hydraulics Library from Modelon, you need to Configure the License Manager.

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.

Windows Silent Installation

On Windows, it is possible to install the network version of MapleSim Hydraulics Library from Modelon using a silent mode option. For Windows XP, Windows Server 2008, Windows Vista, Windows 7 (32-bit or 64-bit), or Windows 8 (32-bit or 64-bit) follow these instructions. You must ensure that the information in the resource file is accurate.

Pre-installation Instructions

  1. Check the Windows System Requirements.
  1. Close all programs, particularly Microsoft Excel and any previous release of MapleSim Hydraulics Library from Modelon
  1. Log on as administrator or ensure that you have administrator privileges
  1. Create a resource file.

You can create a resource file automatically by running the installer with the command MS6.2ModelonHydraulicsWindowsInstaller.exe -r <PATH>\installer.properties (32-bit Windows) or MS6.2ModelonHydraulicsWindowsX86_64Installer.exe -r <PATH>\installer.properties (64-bit Windows), where <PATH> is the path to your specified directory. Follow the on-screen instructions and complete the installation.

You can use the installer.properties file generated by the -r flag or you can create your own using the following example as a template:

INSTALLER_UI=SILENT

#Choose Maple 17 Installation

#---------------------

FOLDER_NAME_1=C:\\Program Files\\Maple 17

#Choose the Type of Licensing

#----------------------------

LICENSE=\"\",\"Network License\"

LICENSE_1=

LICENSE_2=Network License

LICENSE_BOOLEAN_1=0

LICENSE_BOOLEAN_2=1

LICENSE server

#----------------------------

LICENSE_SERVER=myserver.mydomain.com

PORT_NUM=

  1. Open a command prompt window.
  1. Browse to the directory in which your MS6.2ModelonHydraulicsWindowsInstaller.exe or MS6.2ModelonHydraulicsWindowsX86_64Installer.exe file is located.
  1. Run the silent installation process with the command MS6.2ModelonHydraulicsWindowsInstaller.exe -f installer.properties (32-bit Windows) or MS6.2ModelonHydraulicsWindowsX86_64Installer.exe -f installer.properties.

Note: If you created your installer.properties file in a directory other than the directory in which the MS6.2ModelonHydraulicsWindowsInstaller.exe or MS6.2ModelonHydraulicsWindowsX86_64Installer.exe file is located, you must specify the path to the installer.properties file when you run this command.

Notes

  1. The INSTALLER_UI=SILENT line is not added automatically to the installer.properties file if it was created with the -r flag during installation. If the -r flag was used to create the installer.properties file, INSTALLER_UI=SILENT must be added as the first item in the file.
  1. The template assumes MapleSim 6.2 Hydraulics Library from Modelon will be installed into the C:\Program Files\Maple 17\toolbox\ModelonHydraulics folder. If another location is desired, change the USER_INSTALL_DIR accordingly.
  1. Change the license server name (required) and add a port number (optional) accordingly

Additional Information

  • You are not provided with any feedback when you run the installer in this mode
  • While you can install the single-user version of MapleSim Hydraulics Library from Modelon silently, it is not possible to activate the product at this time. After the silent installation of the single user version of MapleSim 6.2 Hydraulics Library from Modelon is complete, from the Start menu, select All Programs, then MapleSim 6.2 Hydraulics Library from Modelon, then Tools and then Activate MapleSim 6.2 Hydraulics Library from Modelon.

Silently Uninstalling on Windows

  1. To perform a silent uninstallation of MapleSim Hydraulics Library from Modelon, at a command prompt, run the following command.

"C:\Program Files\Maple 17\toolbox\ModelonHydraulics\Uninstall_ModelonHydraulics\Uninstall.exe" -i silent

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.

Configure the License Manager

Configure the License Manager for Windows

Before starting the Windows Network version of MapleSim 6.2 Hydraulics Library from Modelon, you must obtain your license file and start the license manager by completing the following tasks.

  1. Choose one of the following:

Install FlexNet Publisher and Activation Utilities

  1. Double-click NetworkToolsInstaller_Windows.exe from the install disc or from where you downloaded the file.
  1. Close all programs, particularly Microsoft® Excel and any previous release of MapleSim Hydraulics Library from Modelon.
  1. Follow the on-screen instructions.

Activate a Network License

MapleSim 6.2 Hydraulics Library from Modelon requires a MapleSim 6.2 Hydraulics Library from Modelon license file to operate. License files for earlier versions of MapleSim Hydraulics Library from Modelon do not work with MapleSim 6.2 Hydraulics Library from Modelon. To obtain your license file, you must use the Maple Network Tools activation program or activate off-line by following the instructions at http://www.maplesoft.com/contact/webforms/offlineactivation/. Ensure that you can connect to the Internet as activation requires an Internet connection. If your computer does not have an Internet connection, please contact Maplesoft customer service.

  1. Depending on your version of Windows, do one of the following:
  • If you are using Windows 8, right-click anywhere in the Start window. The toolbar opens at the bottom of the screen. Next, click the All apps icon. Under the Maple Network Tools heading, right-click on the Activate Maple tile. Next, click the Run as administrator icon.
  • For all other supported versions of Windows, from the Start menu, select (All) Programs > Maple Network Tools > Activate Maple.

Note: If you are using Windows Vista or Windows 7, right-click Activate Maple and select Run as administrator.

  1. You will be prompted to enter your purchase code, hostname, and hostid of your license server. If you are activating behind a proxy server, make sure to enter this information before clicking Next.
  1. You will be prompted to enter additional information including the number of licenses you are activating. Click Next when this is complete.
  1. A license file, ModelonHydraulics62.lic, will be saved to the C:\Program Files\Maple Network Tools\activate folder. You will need this license file in the next step.

Start the License Manager for MapleSim 6.2 Hydraulics Library from Modelon Only

The C:\Program Files\Maple Network Tools\FLEXlm\11.7\windows directory contains license manager daemons, lmgrd and maplelmg, as well as utilities to assist you in installing and configuring FlexNet Publisher for your system.

Start the License Manager Daemons

If you intend to use a Novell® server, see Novell Networks.

To set up and start the license manager daemons on a Windows Network Server:

  1. From the Start menu, select (All) Programs>Maple Network Tools>LMTools11.7. Note: If you are using Windows 8, right-click anywhere in the Start window to display the toolbar at the bottom of the window. Click the All apps icon. Under the Maple Network Tools heading, click LMTools11.7
  1. Under the Service/License File tab, click Configuration using Services.
  1. Click the Config Services tab.
  1. In the Config Services property sheet, enter or browse to the following files:

Service Name

Enter a name for the service (optional)

Path to the lmgrd.exe file

C:\Program Files\Maple Network Tools\FLEXlm\11.7\windows\lmgrd.exe

Path to the license file

C:\Program Files\Maple Network Tools\activate\ModelonHydraulics62.lic

Path to the debug log file Enter the path to the directory containing the debug log file. You must create this file manually (log.txt is the manually created file in the example below), as it is not automatically generated.

C:\Program Files\Maple Network Tools\FLEXlm\11.7\windows\log.txt

  1. To set up the daemons as a service (recommended), select the Use Services check box. This is available for Windows XP, Windows Vista, Windows 7, and Windows 8.
  1. To start the daemons at boot time (recommended), select the Start Server at Power Up check box
  1. Click Save Service. When prompted to save the service, click Yes
  1. Click the Start/Stop/Reread tab. In that property sheet, click Start Server to start the license manager daemons

You can now use MapleSim 6.2 Hydraulics Library from Modelon

Start the License Manager for Multiple Maplesoft Products

To run Maple and associated products, you must place all license files in the same directory. If you have other FlexNet Publisher license files stored in one central location, you can store Maple and associated product license files there as well.

Note: This version of Maple and associated toolbox licensing is compatible with licensing for Maple 14 and later, but not with licensing for releases previous to Maple 14. Maple and toolboxes earlier than release 14 need to be running the Maple 13 version of the Maple Network Tools.

Complete the following tasks:

Stop the License Manager
  1. Go to the directory of the FlexNet Publisher utilities that are currently being used and double-click lmtools.exe. Alternatively, in the Start menu, select (All) Programs>Maple Network Tools>LMTools11.7 Note: If you are using Windows 8, right-click anywhere in the Start window to display the toolbar at the bottom of the window. Click the All apps icon. Under the Maple Network Tools heading, click LMTools11.7
  1. Under the Service/License File tab, click Configuration using Services.
  1. Click the Config Services tab. From the Server Name list, select the service currently being used.
  1. Click the Start/Stop/Reread tab, then click Stop Server.
Move all MapleSim Hydraulics Library from Modelon License Files to a Common Directory

Using Windows Explorer, move all of the license files to a common directory, for example, C:\Program Files\Maple Network Tools\activate.

Start the License Manager Daemons
  1. From the Start menu, select (All) Programs>Maple Network Tools >LMTools11.7. Note: If you are using Windows 8, right-click anywhere in the Start window to display the toolbar at the bottom of the window. Click the All apps icon. Under the Maple Network Tools heading, click LMTools11.7
  1. Under the Service/License File tab, click Configuration using Services.
  1. Click the Config Services tab.
  1. In the Config Services property sheet, enter or browse for the following:

Service Name

Enter a name for the service (optional)

Path to the lmgrd.exe file

C:\Program Files\Maple Network Tools\FLEXlm\11.7\windows\lmgrd.exe

Path to the license file Note: The path to the license file should not contain a terminating backslash

C:\Program Files\Maple Network Tools\activate

Path to the debug log file Enter the path to the directory containing the debug log file. You must create this file manually (log.txt is the manually created file in the example below), as it is not automatically generated.

C:\Program Files\Maple Network Tools\FLEXlm\11.7\windows\log.txt

  1. To set up the daemons as a service (recommended), select the Use Services check box. This is available for Windows XP, Windows Vista, Windows 7, and Windows 8.
  1. To start the daemons at boot time (recommended), select the Start Server at Power Up check box.
  1. Click Save Service. When prompted to save the service, click Yes.
  1. Click the Start/Stop/Reread tab. In that property sheet, click Start Server to start the license manager daemons.

You can now use your network licensed Maplesoft products.

Novell Networks

FlexNet Publisher does not run on Novell or IPX/SPX. Follow these instructions to install the license manager on any network that is exclusively a Novell environment.

  1. Install TCP/IP on all client machines.
  1. Select a Windows computer that has TCP/IP installed to act as a license server and run the license daemons using the Start License Manager for MapleSim 6.2 Hydraulics Library from Modelon Only instructions.

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.

Configure the License Manager for Mac OS X

Before starting the Mac OS® X Network version of MapleSim 6.2 Hydraulics Library from Modelon, you must obtain your license file and start the license manager by completing the following tasks.

  1. Choose one of the following:

Install FlexNet Publisher and the Activation Utilities

  1. To begin installing the FlexNet Publisher and Activation Utilities, choose one of the following:
  1. Place the MapleSim 6.2 Hydraulics Library from Modelon DVD in the DVD-ROM drive.
  1. Double-click NetworkToolsInstaller_Mac.dmg from where you downloaded the file.
  1. Run the installer by double-clicking the NetworkToolsInstaller_Mac icon.
  1. Follow the on-screen instructions.

Activate a Network License

MapleSim 6.2 Hydraulics Library from Modelon requires a MapleSim 6.2 Hydraulics Library from Modelon license file to operate. License files for earlier versions of MapleSim Hydraulics Library from Modelon do not work with MapleSim 6.2 Hydraulics Library from Modelon. To obtain your license file, you must use the Maple Network Tools activation program or activate off-line by following the instructions at http://www.maplesoft.com/contact/webforms/offlineactivation/. Ensure that you can connect to the Internet as activation requires an Internet connection. If your computer does not have an Internet connection, please contact Maplesoft customer service.

  1. From the Finder, open a terminal window from Applications -> Utilities.
  1. Change to the location of the activation utility directory. By default, /Users/<username>/Applications/Maple_Network_Tools/activate.
  1. Run the activation script by issuing the command ./activation. To launch activation in console mode, use the -console option.
  1. You will be prompted to enter your purchase code, hostname, and hostid of your license server. If you are activating behind a proxy server, make sure to enter this information before clicking Next.
  1. You will be prompted to enter additional information including the number of licenses you are activating. Click Next when this is complete.
  1. When prompted, enter the name or IP address of the license server.
  1. A license file, ModelonHydraulics62.lic, will be saved to the /Users/<username>/Applications/Maple_Network_Tools/activate directory. You will need this license file for the next step.

Start the License Manager for MapleSim 6.2 Hydraulics Library from Modelon Only

Start the License Manager Daemons

Before you can use MapleSim 6.2 Hydraulics Library from Modelon, you must start the license server. It is recommended that you do not run lmgrd as root because any process run by root is a potential security risk.

  1. Navigate to the location of the FlexNet Publisher utilities for your operating system. By default, /Users/<username>/Applications/Maple_Network_Tools/FLEXlm/11.7/.
  1. Start the license manager daemons
  1. To start the license manager daemon (lmgrd), enter the following command at the prompt:

./lmgrd -c license_file_path -l debug_log &

where license_file_path is the full path and filename of the network license file (by default, /Users/<username>/Applications/Maple_Network_Tools/activate/ModelonHydraulics62.lic), and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.

Help for Starting the License Server

If you have any problems starting the license server in the system boot up files, refer to http://www.flexerasoftware.com.

You can now use MapleSim 6.2 Hydraulics Library from Modelon.

Start the License Manager for Multiple Maplesoft Products

To run Maple and associated products, you must place all license files in the same directory. If you have other FlexNet Publisher license files stored in one central location, you can store Maple and associated product license files there as well.

Note: This version of Maple and associated toolbox licensing is compatible with licensing for Maple 14 and later, but not with licensing for releases previous to Maple 14. Maple and toolboxes earlier than release 14 need to be running the Maple 13 version of the Maple Network Tools.

Complete the following tasks:

Stop the License Manager

Go to the location of the FlexNet Publisher utilities that are currently being used. For MapleSim 6.2 Hydraulics Library from Modelon, the default location is /Users/<username>/Applications/Maple_Network_Tools/FLEXlm/11.7/. Enter the command:

./lmdown

Move all MapleSim Hydraulics Library from Modelon License Files to a Common Directory

Copy all the MapleSim Hydraulics Library from Modelon network license files to /Users/<username>/Applications/Maple_Network_Tools/activate.

Start the License Manager Daemons
  1. Navigate to the location of the FlexNet Publisher utilities for your operating system. By default, /Users/<username>/Applications/Maple_Network_Tools/FLEXlm/11.7/.
  1. When starting license manager daemons, you must enter the path to the directory containing all license files. By default, /Users/<username>/Applications/Maple_Network_Tools/activate.

Note: Point to the directory only, not an actual license file.

  1. To start the license manager, enter the following command:

./lmgrd -c license_file_path -l debug_log

where license_file_path is the full path to the directory containing the license files and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.

You can now use your network licensed Maplesoft products.

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.

Configure the License Manager for UNIX and Linux

Before starting the UNIX Network version of MapleSim 6.2 Hydraulics Library from Modelon, you must obtain your license file and start the license manager by completing the following tasks.

  1. Choose one of the following:

Install FlexNet Publisher and the Activation Utilities

  1. Choose one of the following:
  1. On Linux 32-bit, run the NetworkToolsInstaller_Linux.bin file from the install disc or from where you downloaded the file.
  1. On Linux 64-bit, run the NetworkToolsInstaller_LinuxX86_64.bin file from the install disc or from where you downloaded the file.
  1. On Solaris, run the NetworkToolsInstaller_Sun.bin file from the install disc or from where you downloaded the file.
  1. Follow the on-screen instructions.

Activate a Network License

MapleSim 6.2 Hydraulics Library from Modelon requires a MapleSim 6.2 Hydraulics Library from Modelon license file to operate. License files for earlier versions of MapleSim Hydraulics Library from Modelon do not work with MapleSim 6.2 Hydraulics Library from Modelon. To obtain your license file, you must use the Maple Network Tools activation program or activate off-line by following the instructions at http://www.maplesoft.com/contact/webforms/offlineactivation/. Ensure that you can connect to the Internet as activation requires an Internet connection. If your computer does not have an Internet connection, please contact Maplesoft customer service.

  1. Change to the location of the activation utility directory. By default, $HOME/Maple_Network_Tools/activate.
  1. Run the activation command. To launch activation in console mode, use the -console option.
  1. You will be prompted to enter your purchase code, hostname, and hostid of your license server. If you are activating behind a proxy server, make sure to enter this information before clicking Next.
  1. You will be prompted to enter additional information including the number of licenses you are activating. Click Next when this is completed.
  1. A license file, ModelonHydraulics62.lic, will be saved to the $HOME/Maple_Network_Tools/activate directory. You will need this license file for the next step.

Start the License Manager for MapleSim 6.2 Hydraulics Library from Modelon Only

Start the License Manager Daemons

Before you can use MapleSim 6.2 Hydraulics Library from Modelon, you must start the license server. It is recommended that you do not run lmgrd as root because any process run by root is a potential security risk.

  1. Navigate to the location of the FlexNet Publisher utilities for your operating system. By default, $HOME/Maple_Network_Tools/FLEXlm/11.7/.
  1. Start the license manager daemons.

Using the C Shell

To start the license manager daemon (lmgrd), enter the following command at the prompt,

./lmgrd -c license_file_path -l debug_log &

where license_file_path is the full path and filename of the network license file (by default, $HOME/Maple_Network_Tools/activate/ModelonHydraulics62.lic) and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.

Using the Korn or Bourne Shell

To start the license manager daemon (lmgrd), enter the following command at the prompt:

nohup lmgrd -c license_file_path -l debug_log 2>&1 &

Run Daemons on Startup

To have the daemons run on startup, edit the appropriate boot script (such as /etc/rc.boot, /etc/rc.local, or /etc/rc2.d/Sxxxx). For example, if you run lmgrd as a boot startup script, you can run it as a regular user by using the following su command at the prompt:

su username -c \'umask 022; lmgrd_path -c license_file_path -l log_path\'

where username is a non-privileged user; lmgrd_path is the correct path to the lmgrd file, license_file_path is the full path of the network license file (by default, $HOME/Maple_Network_Tools/activate/ModelonHydraulics62.lic), and log_path is the debug log file path. It is recommended that the network license file be called ModelonHydraulics62.lic.

Help for Starting the License Server

If you have any problems starting the license server in the UNIX system boot up files, refer to http://www.flexerasoftware.com/.

You can now use MapleSim 6.2 Hydraulics Library from Modelon.

Start the License Manager for Multiple Maplesoft Products

To run Maple and associated products, you must place all license files in the same directory. If you have other FlexNet Publisher license files stored in one central location, you can store Maple and associated product license files there as well.

Note: This version of Maple and associated toolbox licensing is compatible with licensing for Maple 14 and later, but not with licensing for releases previous to Maple 14. Maple and toolboxes earlier than release 14 need to be running the Maple 13 version of the Maple Network Tools.

Complete the following tasks:

Stop the License Manager

Go to the location of the FlexNet Publisher utilities that are currently being used. For MapleSim 6.2 Hydraulics Library from Modelon, the default location is /usr/local/Maple_Network_Tools/FLEXlm/11.7/. Enter the command:

./lmdown
Move all MapleSim Hydraulics Library from Modelon License Files to a Common Directory

Copy all of the MapleSim Hydraulics Library from Modelon network license files to one folder, for example, $HOME/Maple_Network_Tools/activate.

Start the License Manager Daemons
  1. Navigate to the location of the FlexNet Publisher utilities for your operating system. By default, $HOME/Maple_Network_Tools/FLEXlm/11.7/.
  1. When starting license manager daemons, you must enter the path to the directory containing all of your license files. By default, $HOME/Maple_Network_Tools/activate.

Note: Point to the directory only, not an actual license file.

  1. To start the license manager, enter the following command:

./lmgrd -c license_file_path -l debug_log

where license_file_path is the full path to the directory containing the license files and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.

You can now use your network licensed Maplesoft products.

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.

Named Network Licensing

Named Network Users run MapleSim Hydraulics Library from Modelon on their own client machines. These client machines are connected to the license server over the network. The Network Named User licensing option allows system administrators to strictly enforce which users, or client machines, may run MapleSim Hydraulics Library from Modelon.

When you install Maple Network Tools, an options file (.opt) is automatically created in the $Maple Network Tools/activate directory.

Note: The vendor daemon, maplelmg.opt, by default, looks for the options file with in the same directory that contains the license file used by the license server manager.

Setting Up Named Network Licensing

To set up Named Network User licensing, perform the following steps:

Edit the Options File

To manually edit the options file, perform the following steps:

  • Go to the directory that contains the options file. By default, this is $Maple Network Tools/activate.
  • INCLUDE lines in an options file state which users can run the product. Add an INCLUDE line for each product. If there is more than one user per product, add an INCLUDE line for each user, as well. Alternatively, you can use the GROUP syntax to combine authorized Named Users for a specific product.
Example 1: Specifying which users can run Maple 17, MapleSim 6.2, and MapleSim 6.2 Hydraulics Library from Modelon

INCLUDE Maple USER User1

INCLUDE Maple USER User2

INCLUDE Maple USER User3

INCLUDE Maple USER User4

INCLUDE MapleSim USER User4

INCLUDE MSMHCL62 USER User4

Example 2: Using GROUP syntax to specify users that can run Maple 17, MapleSim 6.2, and MapleSim 6.2 Hydraulics Library from Modelon

GROUP Maple_users User1 User2 User3 User4

INCLUDE Maple GROUP Maple_users

INCLUDE MapleSim USER User4

INCLUDE MSMHCL62 USER User4

Restart the License Manager.

You must restart the license manager for the changes to the options file to take effect.

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.

Getting Started with the MapleSim Hydraulics Library from Modelon

When the installation and activation process is complete, start MapleSim. A Modelon Hydraulics palette and a Modelon Hydraulics Examples palette are displayed on the left side of the MapleSim window when the toolbox is installed.

For more information, search the help system for ModelonHydraulics,Overview.

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.

System Requirements

32-bit Windows System Requirements

Version

CPU

Recommended RAM

Hard Disk

Windows XP

Intel Pentium III 650 MHz or higher or fully compatible

2 GB

2 GB

Windows Vista

Intel Pentium III 1 GHz

2 GB

2 GB

Windows Server 2008 R2

x86_64 1.4 GHz (single core) or x86_64 1.3 GHz (dual core) or equivalent

2 GB

2 GB

Windows 7

Intel Pentium III 1 GHz

2 GB

2 GB

Windows Server 2012

x86_64 1.4 GHz (single core) or x86_64 1.3 GHz (dual core) or equivalent

2 GB

2 GB

Windows 8

Intel Pentium III 1 GHz

2 GB

2 GB

  • DVD-ROM drive (for DVD installation).
  • 16-bit color at 1024 by 768 (or greater) resolution recommended.
  • Internal TCP/IP connections enabled.
  • System performance may be affected if running below the recommended memory requirement.

64-bit Windows System Requirements

Version

CPU

Recommended RAM

Hard Disk

Windows XP

AMD X86_64 1 GHz Intel Xeon, Intel 64

2 GB

2 GB

Windows Vista

AMD X86_64 1 GHz Intel Xeon, Intel 64

2 GB

2 GB

Windows Server 2008 R2

AMD X86_64 1 GHz Intel Xeon, Intel 64

2 GB

2 GB

Windows 7

AMD X86_64 1 GHz Intel Xeon, Intel 64

2 GB

2 GB

Windows Server 2012

AMD X86_64 1 GHz Intel Xeon, Intel 64

2 GB

2 GB

Windows 8

AMD X86_64 1 GHz Intel Xeon, Intel 64

2 GB

2 GB

  • DVD-ROM drive (for DVD installation).
  • 16-bit color at 1024 by 768 (or greater) resolution recommended.
  • Internal TCP/IP connections enabled.
  • System performance may be affected if running below the recommended memory requirement.
  • Classic Worksheet is not available on this platform.

Macintosh System Requirements

Vendor

CPU

Operating System

Version

Recommended RAM

Hard Disk

Apple

64-bit Intel

OS X

10.6, 10.7, 10.8

2 GB

2 GB

  • Java™ Runtime Environment 1.6.0_18 or higher installed
  • DVD-ROM drive (for DVD installation).
  • 16-bit color at 1024 by 768 (or greater) resolution recommended.
  • Internal TCP/IP connections enabled.
  • System performance may be affected if running below the recommended memory requirement.
  • Classic Worksheet is not available on this platform.

32-bit Linux System Requirements

Vendor

Operating System Version

CPU

Recommended RAM

Hard Disk

Red Hat Enterprise Linux

5, 6

Intel Pentium III 650 MHz or equivalent

2 GB

2 GB

SUSE Linux Enterprise Desktop

11, 12

Intel Pentium III 650 MHz or equivalent

2 GB

2 GB

Ubuntu

12.04 LTS, 12.10

Intel Pentium III 650 MHz or equivalent

2 GB

2 GB

  • DVD-ROM drive (for DVD installation).
  • 16-bit color at 1024 by 768 (or greater) resolution recommended.
  • X11 R6.
  • Internal TCP/IP connections enabled.
  • System performance may be affected if running below the recommended memory requirement.

64-bit Linux System Requirements

Vendor

Operating System Version

CPU

Recommended RAM

Hard Disk

Red Hat Enterprise Linux

5, 6

Intel 64 or AMD X86_64

2 GB

2 GB

SUSE Linux Enterprise Desktop

11, 12

Intel 64 or AMD X86_64

2 GB

2 GB

Ubuntu

12.04 LTS, 12.10

Intel 64 or AMD X86_64

2 GB

2 GB

  • DVD-ROM drive (for DVD installation).
  • 16-bit color at 1024 by 768 (or greater) resolution recommended.
  • X11 R6.
  • Internal TCP/IP connections enabled.
  • System performance may be affected if running below the recommended memory requirement.
  • Classic Worksheet is not available on this platform

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.

Trademarks

Note: Maple uses the Flexera Software Corporation FlexNet Publisher as its license manager. This document contains all the information you require for a standard Maple installation. For more information, refer to the FlexNet Publisher documentation at http://www.flexerasoftware.com/.

Maple, MapleSim, Maplesoft, and Waterloo Maple are trademarks of Waterloo Maple Inc.

Intel is a registered trademark of Intel Corporation.

Microsoft, Windows, Windows Server, Windows Vista, Excel, and Internet Explorer are registered trademarks of Microsoft Corporation.

Macintosh and Mac OS are registered trademarks of Apple Computer, Inc.

NVIDIA is a registered trademark of NVIDIA Corporation.

Java and JRE are registered trademarks of Oracle and/or its affiliates.

OpenGL is a registered trademark of Silicon Graphics Inc.

FLEXlm and FlexNet are registered trademarks of Flexera Software Corporation.

Linux is a registered trademark of Linus Torvalds.

Hydraulics Library is a registered trademark of Modelon AB.

All other brand names or product names are trademarks or registered trademarks of their respective companies.

Return to the top of the MapleSim 6.2 Hydraulics Library from Modelon Installation and Licensing Guide.