Electro-Hydraulic Clutch Actuator MapleSim Model - Electro-Hydraulic Clutch Actuator S-Function - MapleSim Model Gallery

Electro-Hydraulic Clutch Actuator

This is a model of a typical clutch actuation system found in an automatic transmission. The transmission controller sends an on/off signal to a solenoid that opens/closes a hydraulic valve. The hydraulic pressure is supplied by an oil pump connected to the engine drive shaft and will vary with engine speed. A pressure relief valve is used to regulate the supply pressure to the clutch actuator.

Close

This Model Requires MapleSim

If you do not have MapleSim, contact us to arrange a short, live demonstration with a MapleSim product expert, where you will:


  • See how this model operates
  • Learn how it was developed
  • Discover how it can be modified to fit your requirements
Request a Live Demo

If you have a copy of MapleSim available, you can download the model here:

Download the Model
Close

Request an S-Function

MapleSim Models can be readily exported as royalty-free S-functions. To request the S-function corresponding to this model, please fill in the form below.


Model: Electro-Hydraulic Clutch Actuator
Industry:

Submitting form...

Thank you for requesting the S-Function. Your request has been received and you can expect to hear from us shortly. Close Window
Oops! There was a problem. Try again later Close Window
Model Images
  • ElectroHydraulicClutchActuator Over 6 different domains seamlessly interact in the same model environment.
  • model Model diagram showing the hydraulic valve, solenoid, engine and clutch
  • subsystem Subsystem view of the solenoid
  • plots Simulation results
Simulink is a registered trademark of The MathWorks, Inc.