Two Hand Safety System MapleSim Model - Two Hand Safety System S-Function - MapleSim Model Gallery

Two Hand Safety System

The purpose of a two handed safety systems is to protect an operator from injury.  In this model, the two handed safety system is for a press operation where both hands must be used to activate the machine, ensuring that the operator is outside the danger zone during the pressing operation.  When both buttons are pressed, the cylinder will extend, when both buttons are released, the cylinder will retract. When only one button is pressed, all pressure in the system is dropped and the cylinder position is locked.

This model uses the MapleSim Hydraulics Library from Modelon

This Model Requires MapleSim

If you do not have MapleSim, contact us to arrange a short, live demonstration with a MapleSim product expert, where you will:

  • See how this model operates
  • Learn how it was developed
  • Discover how it can be modified to fit your requirements
Request a Live Demo

If you have a copy of MapleSim available, you can download the model here:

Download the Model

Request an S-Function

MapleSim Models can be readily exported as royalty-free S-functions. To request the S-function corresponding to this model, please fill in the form below.

Model: Two Hand Safety System

Submitting form...

Thank you for requesting the S-Function. Your request has been received and you can expect to hear from us shortly. Close Window
Oops! There was a problem. Try again later Close Window
Model Images
  • model image The model schematic of the system
  • results image Simulation results
  • 3d image Animation of the simulation results
MapleSim Video
Video not available in this browser.
Simulink is a registered trademark of The MathWorks, Inc.